Professional Truck Factory
product-banner
You are here: Home » Products » Tank Truck » Fuel Tank Truck » HOWO Aircraft Refueling Truck with Oil Tank

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

HOWO Aircraft Refueling Truck with Oil Tank

Product Specifications:
  • Company: Hubei Kangmu Special Vehicle Equipment Co., Ltd.
  • Product Name: HOWO Aircraft Refueling Truck with Oil Tank
  • Keywords: Fuel Tank Truck
  • Attributes: With After-Sale Service, One Year Warranty, Truck
Availability:
Quantity:

【 Main technical parameters 】

Product Name HOWO Aircraft Refueling Truck with Oil Tank
Tank Thickness 5.6mm Loading cargo Jet fuel and aviation gasoline
Tank Material

Aluminum Alloy

Gearbox VGD75
Tank Volume 20CBM Inlet 2 European standard inlets


Advantages:

  • Tank body thickness5.6mm, head thickness 5.7mm, partition thickness 5.7mm,

  • single compartment, dedicated 50 # hydraulic reel for refueling trucks with a flow rate of 500L/min, dedicated DN65 hydraulic reel with a flow rate of 850L-1200L/min with a flow rate of 500mm and an aviation stabilizing joint (with a flow rate of 0.2L/min);,

  • Explosion proof lamp; Equipped with European standard system, oil and gas recovery and anti overflow system, and coalescence separator (90F/hour); 

  • Self suction centrifugal pump (pump in and pump out) with auxiliary drive shaft driving hydraulic station; 3-inch float level gauge;

  •  Left HYJ-63X connector valve (equipped with oil and gas recovery connector, equipped with four-position three-way) with elastic soft connection; 

  • Operating equipment box: remote magnetic control switch, manual throttle (including cylinder), pressure control valve inside the pipe, Venturi tube, high liquid level control valve, magnetic control refueling program controller. Four pressure gauges before (after) filtration, equipped with differential pressure gauge, Venturi pressure gauge, and hydraulic pressure gauge. Pre/post filter/discharge sampling (closed circuit sampler); And make a self-made sampling and recovery cylinder. 

  • Laying protective nets on the top of the tank, equipped with movable guardrails, and climbing ladders inside/outside the tank; Two unloading boxes/one toolbox/one operation box each; 

  • Two sets of single bridge folding mudguards, equipped with side protection/rear protection/pipelines/ball valves/gaskets/bolts; 

  • Other accessory factory labels; 

  • Clean the surface thoroughly, and label/reflective stickers according to the factory logo.


reference onlyfd011f0d9a0c02566ceab2b9b1e2d24






Previous: 
Next: 
 +86-13886897232
 +86-18086010163
 No.77 Yumin Avenue, Economic Development Zone, Zengdu District, Suizhou City, Hubei Province.

Product Category

Social Connect

Quick Links

Get A Quote

Copyright ©  2024 Hubei Kangmu Special Vehicle Equipment Co.,Ltd. All Rights Reserved. Privacy PolicySitemap | Supported by leadong.com.
 No.